Product Overview
Reinforced gabions add reinforcing members to a woven mesh structure. Transverse or longitudinal reinforcement can be specified for water-engineering, slope and road works, with the resulting configuration defined by the application rather than by a universal basket specification.
Reinforcing members may run across or along the woven mesh. Nominal basket examples include 2 × 1 × 0.5 m and 2 × 1 × 1 m, with 60 × 80 mm, 80 × 100 mm and 100 × 120 mm mesh examples. Confirm each project configuration.
An enquiry should include the drawings and any required material or test specifications. Confirm the structural selection with the project designer; generic statements about flow speed, ground conditions or service life do not replace a design for the actual location.
Reinforcing members may run across or along the woven mesh. Nominal basket examples include 2 × 1 × 0.5 m and 2 × 1 × 1 m, with 60 × 80 mm, 80 × 100 mm and 100 × 120 mm mesh examples. Confirm each project configuration.
An enquiry should include the drawings and any required material or test specifications. Confirm the structural selection with the project designer; generic statements about flow speed, ground conditions or service life do not replace a design for the actual location.
Configuration Checklist
Application drawing and unit arrangement
Mesh opening and individual wire diameters
Reinforcement material, diameter and spacing
Coating and component test requirements
Partitions and reinforcement connections
Zinc coating: coating specification to agree
Zinc-aluminium: alloy composition to agree
Zinc-aluminium-magnesium: composition to agree
PVC or PE: polymer and colour to agree
Made Around Your Specification
Reinforced gabions combine woven mesh with additional reinforcing members for project-specific earthworks and protective structures. Specify the basket arrangement, reinforcement and wire treatment as a complete configuration. Drawings and design requirements are needed to identify the reinforcement direction, spacing and connections for an accurate product quotation and supply schedule.
Specifications
Configuration: project-specific
Quotation: after specification review
Nominal options are a starting point for discussion. Confirm the selected dimensions, wire and surface treatment against your project drawing.
Ordering
- Dispatch
- Factory reference: approximately 7 days to first factory dispatch. The full order schedule and timing basis are confirmed in the quotation; this is not international arrival.
- Packing
- Folded units in bundles; bundle dimensions, quantities and weights confirmed per order.
Product Configuration
- Base structure
- Double-twisted hexagonal mesh with transverse or longitudinal reinforcement
- Nominal basket options
- 2 × 1 × 0.5 m; 2 × 1 × 1 m; 3 × 1 × 0.5 m
- Nominal mesh openings
- 60 × 80 mm; 80 × 100 mm; 100 × 120 mm
- Nominal mesh wire options
- 2.2 mm; 2.5 mm; 2.7 mm; bare or coated diameter basis to confirm
- Coating options
- Galvanized steel mesh; additional PVC or PE covering
- Wire configuration
- Mesh, edge and reinforcing wires specified separately; final sizes to confirm
Please identify the exact option required in your enquiry. Dimensions, wire components and treatment combinations are confirmed in the written quotation.
Materials & Finish
Wire options include zinc, zinc-aluminium and zinc-aluminium-magnesium metallic coatings, with PVC or PE finishes available for discussion. Confirm the alloy composition, coating specification and polymer separately. Nominal mesh-wire examples are 2.2, 2.5 and 2.7 mm; mesh, edge and tying wire diameters must be specified separately, including whether each value is the bare wire or coated outside diameter.
Material configuration
Zinc coating: coating specification to agree
Zinc-aluminium: alloy composition to agree
Zinc-aluminium-magnesium: composition to agree
PVC or PE: polymer and colour to agree
Project applications
River and embankment works
Road-slope protection
Supply & Configuration
Specification Review
Project requirements
Share the drawing, dimensions, material and intended use for reinforced gabions. Supply scope and requested test documents are confirmed in the quotation.
Applications & Project Context
River and embankment works
Road-slope protection
Railway-slope protection
Soft-ground road works
Road-slope protection
Railway-slope protection
Soft-ground road works
Share the site conditions and intended use with your enquiry. Product configuration and any design requirements should be reviewed against the project specification; photographs illustrate product types and are not a named project record.
Details for Your Quotation
Application drawing and unit arrangement
Mesh opening and individual wire diameters
Reinforcement material, diameter and spacing
Coating and component test requirements
Partitions and reinforcement connections
Quantity, packing and destination
Product Questions
What should I include in a reinforced gabions enquiry?
For reinforced gabions, provide application drawing and unit arrangement; Mesh opening and individual wire diameters; Reinforcement material, diameter and spacing; Coating and component test requirements. Include the quantity, destination and any requested material or test documents.
How is the final configuration agreed?
The dimensions and material routes shown here are catalogue reference options. Confirm the selected mesh or panel layout, component specifications, finish, connections and packing in the written quotation. Testing and project-design requirements should be identified before ordering.
